Vikakoodi:P1643

Tänne asiaa ja kysymyksiä Jeepin sähköistä....
Xere
Viestit: 14
Liittynyt: 28.11.2018. 19:25
Paikkakunta: Kiuruvesi

Vikakoodi:P1643

Viesti Kirjoittaja Xere » 06.07.2020. 17:03

Tuommoinen löytyi auton mittaristosta virtalukko konstilla. Mitähän meinaa...? Ei näkyvää tai tuntuvaa vikaa tällähetkellä. WJ, 2.7d,-04

Avatar
JAMANT
Site Admin
Viestit: 6435
Liittynyt: 26.03.2008. 20:33
Paikkakunta: Espoo
CONTACT:

Re: Vikakoodi:P1643

Viesti Kirjoittaja JAMANT » 06.07.2020. 17:34

Supercharger Bypass Valve Actuator Control System - Stuck Closed

The Supercharger boost pressure is managed by the use of a Supercharger Bypass (SCB) Valve. The PCM can vary the position of the SCB Valve to control the amount of boost. The SCB system uses two Position Sensors to monitor the SCB blade position. Position Sensors are located within the SCB Valve assembly. Each sensor has its own Signal circuit. Both sensors share a 5-Volt reference circuit (Supply) and a low reference circuit (Sensor Return). The Powertrain Control Module (PCM) monitors the SCB Valve Sensor data. Each Signal circuit provides the PCM with a signal voltage proportional to SCB blade movement. The PCM monitors the data to verify that the indicated SCB position is correct.

*COKING OR BLOCKAGE OF THE SUPERCHARGER BYPASS VALVE PLATE
*SUPERCHARGER BYPASS VALVE
Your Jeep specialist

Jeep Comanche -89, 4,0L6+AW-4+NP-231+Dana30+Dana35 w/POWERTRAX w/ 4"+ korotus & HD-steering sekä Jeep Wagoneer Limited -79, 360V8+TH-400+Quadra-Trac projekti
FJDC #1

Kirjoita vastaus